X VAPE Vista Mini 2 Vaporizer Quickstart Information

197 0
X VAPE Vista Mini 2 Vaporizer What's in the box

The variety of functions and competitive prices of the X VAPE Vista Mini 2 make it a solid competitor in the portable e-nail scene. Whether you are working with blobs for the first time or are an experienced professional, we will get you up and running with our quick guide.

What's in the box

  • X VAPE Vista Mini 2 vaporizer
  • carry bag
  • Additional heating coil (2 in total)
  • 2 replacement O-rings
  • 3 alcohol wipes
  • Replacement silicone connecting ring
  • Swab tool
  • 2 silicone carburetor cap connections
  • 1 plastic buckle (Keck Clip)
  • 3 cotton swabs
  • USB charging cable

Before use: charge it

The Vista Mini 2 is delivered with a partial load. However, we recommend refilling it before using it for the first time. If you have a wireless charger available, just throw it on and let it do its job. Otherwise, connect it with the included micro USB cable. A flashing red light indicates that the battery is low, green about 50% and white means that you are in the last half. The flashing charge indicator will go out when it is fully charged.

X Charge the VAPE Vista Mini 2 vaporizer

Fill the bubbler

Each bubbler has a certain water level sweet spot for best performance. Instead of making you guess, X VAPE did the work for you and put a red fill line on the bubbler. As soon as the Vista Mini 2 is charged, fill the bubbler through the mouthpiece connection up to this line!

X VAPE Vista Mini 2 vaporizer bubbler

Try it

We usually recommend a burnoff session with dry herbal vaporizers, but that's not necessary here. Instead, we just want to confirm that everything is connected and working properly before loading your first swab. First connect one of your atomizers. Find one in the case and screw it clockwise onto the Vista Mini 2.

Click the power button three times to turn it on. The button should blink three times and the bubbler will light up to the color of the selected temperature. Press the button once to activate the heater and let it run until the heater under the quartz bowl lights up orange.

X VAPE Vista Mini 2 evaporator heating coil

Choose your temperature

The Vista Mini 2 offers four preset temperatures for different users. We recommend beginners to start on white or green for a relaxing but tasty experience. You can toast it later at any time. If you're used to the high temperature and power of a traditional flashlight, set it to blue or red. Double-click the button to scroll through the four temperatures.

X VAPE Vista Mini 2 vaporizer blue temperature

Drop and Glob!

Before we activate the heating, we load your swab. For this first session, scratch, tear, or scoop a Rice grain size of your chosen material and place it in the atomizer. Make sure it lands on the bottom of the quartz bowl and not on the sides.

When you're ready to play rock & roll, press the button once to turn on the heater and the bubbler light will blink. When it vibrates, the bubbler light stays on and you're ready to go! Take a nice, relaxed train and watch the steam flow through the bubbler. The Vista Mini 2 turns off automatically after 35 seconds. However, you can end it earlier by clicking the button once. When the session ends and you want more, click the button again to restart it.

If there is still oil in the heating coil, it can remain there for a later session. Load a little less next time – try loading only what you use in one session, and your concentrates will last longer and taste better

Fast cleanup

We'll publish a full cleaning guide shortly, but it's a good idea to get used to quick and easy cleaning after each session. After you're done with each charge, take a dry cotton swab and wipe the heating coil while the oils are still warm but not hot. If you don't clean these oils, they will accumulate in the corners and burn.

Leave a Reply